Brand | STP Limited |
---|
Health & Safety :
- ShaliMastic® HD / LC is inflammable.
- Use goggles and hand gloves during application.
- Clean hands with Isopropyl alcohol followed by warm soap water after application.
Storage :
- Keep in cool and dry place under shed away from heat. Keep lid of container closed tightly when not in use.
Application :
- Cold applied liquid product.
- Protection for buried / submerged surface or equipment.
- Coating interior / exterior surfaces of metal or concrete tanks, culverts, steel pilings, filter screens, sluice gates, tank bases, trestles etc.
- Coating of interior / exterior of barges and under-water structures.
Advantages :
- Unaffected by marine organisms, soil chemicals and soil bacteria.
- Highly resistant to corrosive attacks of sea water and alkalis.
- Retains its pliability over a wide range of temperatures.
- Provides an abrasion resistant tough coat which is 5-8 times thicker than a coat of ordinary conventional anti-corrosive coatings.
- Provides a void-less, joint-less continuous film capable of taking expansions and contractions without cracking.
- Acts as an excellent water repellent coating even under severe corrosive conditions.
Application Methodology :
- The base metal is thoroughly cleaned either by sand blasting, wire brushing or by any other means.
- Before application, ensure that surface is totally dry and free from moisture, oil, grease, mill scale, rust or any other foreign particles.
- A coat of Jet Set® Primer Type A is recommended before application for better performance. The primer must be hard dry before application of ShaliMastic® HD / LC.
- ShaliMastic® HD / LC, being a thixotropic material, has to be stirred properly first. It is then applied using a brush. Two coats are recommended for concrete and three coats for metallic surfaces.
- ShaliMastic®-HD should not be applied over shop-coating (particularly red oxide coating).
Reviews
Clear filtersThere are no reviews yet.