STP Limited – Super Flash Strip – 10m x 1.5mm

Application Methodology :

• Surface must be dry, compact, clean and free of loose particles and impurities; if the application surface area is porous, SuperFlashStrip® should be applied after a coat of ShaliPrime APP.
• Choose the most suitable width of SuperFlashStrip®.
• Unroll the tape until the desired length is reached.
• Remove the silicon released film and position the tape on the dry surface.
• Press with a roller or a cloth pad.
• In case of overlapping, the minimal overlapping width should be 10 mm.
• The best application temperature is above 5 °C.
• Do not apply when it is raining, freezing or snowing.

Health & Safety :

• Non-hazardous for normal use
• Use goggles and hand gloves during application.
• Clean hands with warm soap water after application.

Application :

• For sealing : frames and skylights, parapets, glass and plastic structure.
• For protecting : metal, plastic, asbestos cement, roofs and coverings in general.
• For repairing : tiles, gutters, metal pipes, metal plate or asbestos cement roofs.

Advantages :

• Easy to fix and compatible with most building material.
• No special tools required; only a sharp knife / scissors and a roller / cloth pad is enough.
• It does not require any torching and hence is suitable for use in all conditions.
• Cold applied, doesn’t require heat or chemical bonding agents.
• Specially trained personnel are not required for application.
• Withstands climatic changes.
• Simple and quick application. Saves time and cost.

Storage :

• Keep in cool dry place under the shed away from heat with atmospheric temperature ranging between +5 °C and +40 °C.

Packing :

• Rolls are individually shrink wrapped and placed in cartons. Standard length of each roll is 10 m, with width of 50 mm (2”) / 100 mm (4”) and thickness of 1.5 mm.