REDWOP – POLYCOTE WH – Waterproofing Chemical

Elastomeric waterproofing membrane.

This product is currently out of stock and unavailable.

Description

Description:
POLYCOTE WH is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an
effective waterproof membrane.

Uses:
Roofs, terraces and balconies as a sandwich layer.
Pools and fountains.
Reservoirs and channels.
End walls subjected to rain.

Advantages:
Non – toxic, non-flammable and user friendly.
Can be used in portable water tank also.
Provides a tough, impermeable waterproof membrane.
Can be applied by brush, on horizontal and vertical surfaces.
Excellent adhesion to concrete and masonry surfaces
Protects concrete and mortar from natural elements such as wind, rain, sunlight.
Breathable – allows inside water vapor to escape.

Compliance standard:
ASTM C1202
WRAS – “Suitable for use in contact with portable water” – BS 6920: 2000

Application procedure:
Remove all dust, laitance or debris the surface must also be free from oil, grease, wax or any other form of foreign matter which
might affect adhesion.
The surface should be primed with POLYCOTE WH as follows:
1 part of POLYCOTE WH: 2 parts of Water: 4 parts of Cement Mixed material with the above proportion will cover an area of
16-17m².
Topcoat shall be mixed with cement in ratio 1:2 respectively to obtain uniform and consistent slurry avoiding any lump formation
Stir the material till the entire quantity is applied, so that solids do not settle at the bottom of the container.

Coverage:
Priming coat: 16-17 m²/L
Topcoat – 4.5 – 5.0m²/L/ coat
However the practical consumption varies depending on the texture and porosity of the surface and the application thickness.

Packaging:
Available in 125ml, 250ml, 500ml, 1, 5, 20, 50, and 200 liter packs.

Storage:
Minimum of 12 months self-life if kept under room temperature (i.e. 27°C).

Health & Safety:
POLYCOTE WH is water based and non-toxic. Gloves should be worn during application. Any splashes on the skin or eyes must be
washed off with clean water. In case of prolonged irritation medical advice should be taken.

Weight 5000 kg
Dimensions 175 × 120 × 320 cm
Brand

Redwop

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “REDWOP – POLYCOTE WH – Waterproofing Chemical”

Your email address will not be published. Required fields are marked *

No more offers for this product!