REDWOP – TERATILE GOLD – Waterproofing Chemical

Description:
TERATILE GOLD tile adhesive, is suitable for fixing at 3-6mm bed thickness (can be extended up to 15mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.

Uses:
Porcelain tile.
Vitrified tile.
Ceramic tile.
Interior floor and wall.
Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, 600X1200mm.
Sand stone, khatu, Lapato, Quartz, Lime stones, Granite & marbles in internal application.

Advantages:
Polymer modified.
Excellent adhesion on smooth surfaces.
Forms a dense and impermeable mortar bed.
Self-cure.

Substrate:
RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone.

Compliance standard:
IS 15477:2019, EN 12004

Method of application:
Clean the surface from efflorescence, laitance, dirt and other loose material than sprinkle water over the dry surface to make it wet.
Clean the back side of the tiles surface by using wire brush than wash it with ample amount of water until dryness is removed.
Add 20 kg of tile adhesive powder into 3.7 liter of water in a bucket and blend properly with electric blender.
Apply prepared paste as per requirement on both the tile surface and floor/wall surface.
Comb the adhesive paste to provide sufficient grip between the surface and tiles.

Limitations:
Do not add additional water or powder after tile adhesive gets set.

Coverage:
40 to 50ft² @ 3mm thickness.

Packaging:
TERATILE GOLD is supplied in 20 & 40 Kg bags.

Storage:
Minimum of 24 months shelf-life if kept under room temperature (i.e. 27°C).

Health and Safety:
Specific care and attention should be paid to handling, storage and spill response of this adhesive. Skin contact should be avoided. Any splashes should be
washed well with water. If contact with eyes occurs wash immediately with water and take medical advice.