REDWOP – TERATILE PLATINUM – Waterproofing Chemical

Description:
TERATILE PLATINUM cementitious powder available for fixing of ceramic and vitrified tiles for floor &
wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed
situations such as swimming pools.

Uses:
Tile claddings.
Porcelain tile.
Vitrified tile.
Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm
300mmX900mm, [600X1200mm @internal].
Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthan black stone &
Marbles in internal application.

Advantages:
Suitable for fixing ceramic tiles for floor and wall.
Polymer modified adhesive.
Good strength.
Easy mixing and application.

Substrate:
RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone.

Compliance standard:
IS 15477:2019, EN 12004.

Method of application:
Clean the surface from efflorescence, laitance, dirt and other loose material than sprinkle water
over the dry surface to make it wet.
Clean the back side of the tiles surface by using wire brush than wash it with ample amount of
water until dryness is removed.
Add 20 kg of tile adhesive powder into 3.8 liter of water in a bucket and blend properly with
electric blender.
Apply prepared paste as per requirement on both the tile surface and floor/wall surface.
Comb the adhesive paste to provide sufficient grip between the surface and tiles.

Limitations:
Do not add additional water or powder after tile adhesive gets set.

Coverage:
40 to 50 ft² per 20 kg @ 3mm thickness.

Packaging:
TERATILE SILVER is supplied in 20 & 40 Kg bags.

Storage:
Minimum of 24 months shelf-life if kept under room temperature (i.e. 27°C).

Health and Safety
Specific care and attention should be paid to handling, storage and spill response of this adhesive. Skin contact should be avoided as the material is slightly acidic.